Grinding plant operation announcement

Grinding plant is a essential mining machine for miner, so how to make the machine working for long time is very important.
The operator must carefully observe the operating conditions. This can effectively prevent failures from occurring, to maintain machine properly.
Therefore the operator must ensure the following tasks:
1. Forbidden pieces of metal into the grinding plant, otherwise it will damage grinding roller and grinding ring.
2. grinding plant feeding should be uniform, non-erratic. feeding too much will be blocked duct, lower output, easy to burn out motor, while feeding too little is not good also. Feed size: hard material in the diameters is less than 15 mm, soft material diameter is 20 mm, large pieces of material is strictly prohibited into the machine.
3. Air volume control: air flow control valve on the intake manifold, generally open to maximum position. according to fineness, yield requirements appropriately adjust. Control valve located in the exhaust pipe can be no dust emitted. It should be noted, because wind is too small, the duct is easy to sediment, please be adjusted appropriately.
4. grinding plant fineness adjustment: according to materials, size, hardness, moisture content, adjust the top analyzer, the speed is high, the fineness is high, while speed low, thin low. Improve the fineness, the output of grinding plant will be reduced accordingly.
5. Roller machine ring limit: the remaining minimum wall thickness is not less than 10mm.
Shanghai Clirik Machinery Co., Ltd is a large professional manufacturer with import & export rights specializing in research, manufacture and sales of crushing machinery, mining equipment, and grinding plant, such as micro powder Grinding plant , Mineral Processing Plant , Cement Grinding Plant   Grinding Unit, hammer crushers, jaw crushers and associated accessories. The grinding plant and crushers are widely applied in metallurgy, hydraulic engineering, mining, chemical, construction, coal, refractory, ceramic and other industries.
Should you have any questions about our  grinding plant, please do not hesitate to contact me.
Phone: 0086-21-20236178
Contact person:Jessie Zhao
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201,China.

Contact us

  • Tel: 0086-21-58974855
  • Fax: 0086-21-58975587
  • Add: No.19Fuqing Rd,Shanghai 201201,China
  • Fax: 0086-21-58975587

Tel: 0086-21-58974855 Fax: 0086-21-58975587 Add: No.19Fuqing Rd,Shanghai 201201,China Postcode: 201201 E-mail: