How to turn on the grinding plant

Grinding plant is widely used in the industry of mining, construction materials, chemicals, metallurgy, transportation, hydraulic engeering and so on. It's very important to realize how to operate grinding plant.

Start up grinding plant
1) Turn on main switch
2) Start air compressor, adjust air pressure of oil-water filter to 0.6-0.7Pa.
3) Turn on bag filter pulse controller, adjust the pulse frequency to one spray every 4-5 seconds, adjust pulse width to 0.5-0.8 seconds (pulse controller was set before delivery).
4) Swith on bucket elevator
5) Start up crusher
6) Feed materials to the crusher till enough crushed materials are ent to the hopper, and then strat the classifier.
7) Switch on VVVF/VFD(Variable Voltage Variable Frequency Inverter). Adjust the rotation the rotation speed of the classifier. to 100 meshes; please see the following adjusting method of VVVF/VFD.)
8). Start up high pressure blower, switch air controller to maximum.
9) Start the main unit after the blower runs normally
10) Start vibraing feeder; adjust the current ofmain unit to normal operating amperage( refer to the remarks attached).
11) After preparation of packaging, start discharging valve and screw conveyor for the finished product.
12) All operations complete.